Category: Making Process

Cable Reel Table

Read more

‘Leo Ukulele’ Making Process

The body is sketched onto a small board and inner hole is cut out using a jigsaw.   88 2. The inner hole is completed.   3. On plywood, the lengths of the board are drawn. Then using a circular saw, the plywood is cut.   4. The board and plywood are glued together, keeping one […]

Read more

Sanded Sunrise CBG

Using a single board,the neck, headstock and interior of the cigar box guitar are drawn out. The neck is cut out. Cut the angle in order to create a scarf joint for the headstock. 1 Before joining the neck and headstock back together, the holes for the tuning heads are cut in the style typical […]

Read more

‘Zippee’ 1 String Travel Diddley Bow

Read more

‘Purple Grain’ 3 String Cigar Box Guitar

Take the wooden plank that will make the through body neck of the guitar. This wood was taken from a skip in Cricklewood, North West London. To the right you will see where I have measured where the bridge will be. On the right I have drawn out where the nut will be, drawn out […]

Read more